The `SimplyAgree`

R package was created to make the
process of quantifying measurement agreement, consistency, and
reliability. This package expands upon the capabilities of currently
available R packages (such as `psych`

and
`blandr`

) by 1) providing support for agreement studies that
involve multiple observations (`agree_test`

and
`agree_reps`

functions) 2) provide robust tests of agreement
even in simple studies (`shieh_test`

output from the
`agree_test`

function) and 3) a robust set of reliability
statistics (`reli_stats`

function).

In this vignette I will briefly demonstrate the implementation of the
functions that include tests of agreement. *Please note*, I would
recommend using the `agreement_limit`

function over these
older functions with the exception of `agree_np`

which
provides non-parametric agreement limits.

`agree_test`

In the simplest scenario, a study may be conducted to compare one
measure (e.g., `x`

) and another (e.g., `y`

). In
this scenario each pair of observations (x and y) are
*independent*; meaning that each pair represents one
subject/participant. In most cases we have a degree of agreement that we
would deem adequate. This may constitute a hypothesis wherein you may
believe the agreement between two measurements is within a certain limit
(limits of agreement). If this is the goal then the
`agree_test`

function is what you need to use in this
package.

The data for the two measurements are put into the `x`

and
`y`

arguments. If there is a hypothesized limit of agreement
then this can be set with the `delta`

argument (this is
optional). Next, the limit of agreement can be set with the
`agree.level`

and the confidence level (\(1-\alpha\)). Once those are set the
analysis can be run. Please note, this package has pre-loaded data from
the Zou 2013 paper. While data does not conform the assumptions of the
test it can be used to test out many of the functions in this package.
Since there isn’t an *a priori* hypothesis I will not declare a
`delta`

argument, but I will estimate the 95% confidence
intervals for 80% limits of agreement.

```
a1 = agree_test(x = reps$x,
y = reps$y,
agree.level = .8)
#> Warning: `agree_test()` was deprecated in SimplyAgree 0.2.0.
#> ℹ Please use `agreement_limit()` instead.
#> This warning is displayed once every 8 hours.
#> Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
#> generated.
```

We can then print the general results. These results include the
general parameters of the analysis up top, then the results of the Shieh
exact test for agreement (no conclusion is included due to the lack of a
`delta`

argument being set). Then the limits of agreement,
with confidence limits, are included. Lastly, Lin’s Concordance
Correlation Coefficient, another measure of agreement, is also
included.

```
print(a1)
#> Limit of Agreement = 80%
#>
#> ###- Shieh Results -###
#> Exact 90% C.I. [-1.512, 2.3887]
#> Hypothesis Test: No Hypothesis Test
#>
#> ###- Bland-Altman Limits of Agreement (LoA) -###
#> Estimate Lower CI Upper CI CI Level
#> Bias 0.4383 -0.1669 1.0436 0.95
#> Lower LoA -1.1214 -1.8037 -0.4391 0.90
#> Upper LoA 1.9980 1.3157 2.6803 0.90
#>
#> ###- Concordance Correlation Coefficient (CCC) -###
#> CCC: 0.4791, 95% C.I. [0.1276, 0.7237]
```

Next, we can use the generic `plot`

function to produce
visualizations of agreement. This includes the Bland-Altman plot
(`type = 1`

) and a line-of-identity plot
(`type = 2`

).

The hypothesis test procedure is based on the “exact” approach details by Shieh (2019). In this procedure the null hypothesis (not acceptable agreement) is rejected if the extreme lower bound and upper bound are within the proposed agreement limits. The agreement limits (\(\hat\theta_{EL} \space and \space \hat\theta_{EU}\)) are calculated as the following:

\[ \hat\theta_{EL,EU} = \bar{d} \pm \gamma_{1-\alpha}\cdot \frac{S}{\sqrt{N}} \]

wherein \(\bar{d}\) is the mean
difference between the two methods, \(S\) is the standard deviation of the
differences, \(N\) is the total number
of pairs, and \(\gamma_{1-\alpha}\)
critical value (which requires a specialized function within
`R`

to estimate).

The reported limits of agreement are derived from the work of Bland and Altman (1986) and Bland and Altman (1999).

**LoA**

\[ LoA = \bar d \pm z_{1-(1-agree)/2} \cdot S_d \] wherein \(z_{1-(1-agree)/2}\) is the value of the normal distribution at the given agreement level (default is 95%), \(\bar d\) is the mean of the differences, and \(S_d\) is the standard deviations of the differences.

**Confidence Interval**

\[ LoA_{C.I.} = LoA \pm t_{1-\alpha/2,N-1} \cdot \sqrt{\left[\frac{1}{N}+\frac{(z_{1-\alpha/2})^{2}}{2 \cdot (N-1)} \right] \cdot S^2} \]

wherein, \(t\) is the critical
t-value at the given sample size and confidence level
(`conf.level`

), \(z\) is the
value of the normal distribution at the given alpha level
(`agree.level`

), and \(S^2\)
is the variance of the difference scores. If `TOST`

is set to
TRUE then equation is altered slightly with the critical t (\(t_{1-\alpha,N-1}\)).

The CCC was calculated as outlined by Lin (1989) (with later corrections).

\[ \hat\rho_c = \frac{2 \cdot s_{xy}} {s_x^2 + s_y^2+(\bar x-\bar y)^2} \] where \(s_{xy}\) is the covariance, \(s_x^2\) and \(s_y^2\) are the variances of x and y respectively, and \((\bar x-\bar y)\) is the difference in the means of x & y.

In many cases there are multiple measurements taken within subjects
when comparing two measurements tools. In some cases the true underlying
value will not be expected to vary (i.e., replicates;
`agree_reps`

), or multiple measurements may be taken within
an individual *and* these values are expected to vary (i.e.,
nested design; `agree_nest`

).

The confidence limits on the limits of agreement are based on the
“MOVER” method described in detail by Zou (2011). However, both functions operate
similarly to `agree_test`

; the only difference being that the
data has to be provided as a `data.frame`

in R.

`agree_reps`

This function is for cases where the underlying values do
*not* vary within subjects. This can be considered cases where
replicate measure may be taken. For example, a researcher may want to
compare the performance of two ELISA assays where measurements are taken
in duplicate/triplicate.

So, for this function you will have to provide the data frame object
with the `data`

argument and the names of the columns
containing the first (`x`

argument) and second
(`y`

argument) must then be provided. An additional column
indicating the subject identifier (`id`

) must also be
provided. Again, if there is a hypothesized agreement limit then this
could be provided with the `delta`

argument.

```
a2 = agree_reps(x = "x",
y = "y",
id = "id",
data = reps,
agree.level = .8)
#> Warning: `agree_reps()` was deprecated in SimplyAgree 0.2.0.
#> ℹ Please use `agreement_limit()` instead.
#> This warning is displayed once every 8 hours.
#> Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
#> generated.
```

The results can then be printed. The printing format is very similar
to `agree_test`

, but notice that 1) the hypothesis test is
based on the limits of agreement (MOVER method), 2) the Concordance
Correlation Coefficient is calculated via the U-statistics method, 3)
the Shieh TOST results are missing because they cannot be estimated for
this type of design.

```
print(a2)
#> Limit of Agreement = 80%
#> Replicate Data Points (true value does not vary)
#>
#> Hypothesis Test: No Hypothesis Test
#>
#> ###- Bland-Altman Limits of Agreement (LoA) -###
#> Estimate Lower CI Upper CI CI Level
#> Bias 0.7152 -0.6667 2.0971 0.95
#> Lower LoA -1.2117 -4.7970 0.1054 0.90
#> Upper LoA 2.6421 1.3250 6.2274 0.90
```

`agree_nest`

This function is for cases where the underlying values may vary within subjects. This can be considered cases where there are distinct pairs of data wherein data is collected in different times/conditions within each subject. An example would be measuring blood pressure on two different devices on many people at different time points/days.

The function works almost identically to `agree_reps`

but
the underlying calculations are different

```
a3 = agree_nest(x = "x",
y = "y",
id = "id",
data = reps,
agree.level = .8)
#> Warning: `agree_nest()` was deprecated in SimplyAgree 0.2.0.
#> ℹ Please use `agreement_limit()` instead.
#> This warning is displayed once every 8 hours.
#> Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
#> generated.
```

The printed results (and plots) are very similar to
`agree_reps`

. However, the CCC result now has a warning
because the calculation in this scenario may not be entirely appropriate
given the nature of the data.

```
print(a3)
#> Limit of Agreement = 80%
#> Nested Data Points (true value may vary)
#>
#> Hypothesis Test: No Hypothesis Test
#>
#> ###- Bland-Altman Limits of Agreement (LoA) -###
#> Estimate Lower CI Upper CI CI Level
#> Bias 0.7101 -0.6824 2.1026 0.95
#> Lower LoA -1.1626 -4.8172 0.1811 0.90
#> Upper LoA 2.5828 1.2390 6.2374 0.90
```

`agree_reps`

&
`agree_nest`

All the calculations for the limits of agreement in these two functions can be found in the article by Zou (2011).

`agree_nest`

LoA**Step 1: Calculate Individual Subject Means and
Variances**

\[ \bar x_i = \frac{1}{n_{xi}} \Sigma_{j=1}^{n_{xi}} x_{ij} \] \[ \bar y_i = \frac{1}{n_{yi}} \Sigma_{j=1}^{n_{yi}} y_{ij} \] \[ \bar d_i = \bar x_i - \bar y_i \]

\[ \bar d = \Sigma_{i=1}^{n}\frac{d_i}{n} \]

\[ s_{xi}^2 = \Sigma_{j=1}^{n_{xi}} \frac{(x_{xj}- \bar x_i)^2}{n_{xi}-1} \]

\[ s_{yi}^2 = \Sigma_{j=1}^{n_{yi}} \frac{(y_{ij}- \bar y_i)^2}{n_{yi}-1} \]

\[ s_{\bar d}^2 = \Sigma_{j=1}^{n} \frac{(d_{i}- \bar d)^2}{n-1} \]

**Step 2: Compute pooled estimates of within subject
errors**

\[ s^2_{xw} = \Sigma_{i=1}^{n} [\frac{n_{xi} -1}{N_x -1} \cdot s^2_{xi}] \]

\[ s^2_{yw} = \Sigma_{i=1}^{n} [\frac{n_{yi} -1}{N_y -1} \cdot s^2_{yi}] \]

**Step 3: Compute Harmonic Means of Replicates**

\[ m_{xh} = \frac{n}{\Sigma_{i=1}^n \frac{1}{n_{xi}}} \]

\[
m_{yh} = \frac{n}{\Sigma_{i=1}^n \frac{1}{n_{yi}}}
\] **Step 4: Compute the variance of the
differences**

\[
s^2_d = s^2_{\bar d} + (1+\frac{1}{m_{xh}}) \cdot s^2_{xw} +
(1+\frac{1}{m_{yh}}) \cdot s^2_{yw}
\] **Step 5: Compute MOVER Components**

\[ S_{11} = s_{\bar d}^2 \cdot (1 - \frac{n-1}{\chi^2_{(1-\alpha, n-1)}}) \]

\[ S_{12} = (1-\frac{1}{m_{xh}}) \cdot (1 - \frac{N_x-n}{\chi^2_{(1-\alpha, N_x-n)}}) \cdot s^2_{xw} \] \[ S_{13} = (1-\frac{1}{m_{yh}}) \cdot (1 - \frac{N_y-n}{\chi^2_{(1-\alpha, N_y-n)}}) \cdot s^2_{yw} \]

\[ S_1 = \sqrt{S_{11}^2 +S_{12}^2 +S_{13}^2} \] \[ l = s_d^2 - S_1 \]

\[ u = s_d^2 + S_1 \]

\[ LME = \sqrt{\frac{z^2_{\alpha} \cdot s_d^2}{n} + z^2_{\beta/2} \cdot(\sqrt{u} - \sqrt{s^2_d})^2} \]

\[ RME = \sqrt{\frac{z^2_{\alpha} \cdot s_d^2}{n} + z^2_{\beta/2} \cdot(\sqrt{l} - \sqrt{s^2_d})^2} \] ### LoA

\[ LoA_{lower} = \bar d - z_{\beta/2} \cdot s_d \]

\[ LoA_{upper} = \bar d + z_{\beta/2} \cdot s_d \]

\[ Lower \space CI = LoA_{lower} - LME \]

\[ Upper \space CI = LoA_{lower} + RME \]

\[ Lower \space CI = LoA_{upper} - RME \]

\[ Upper \space CI = LoA_{upper} + LME \]

`agree_reps`

LoA**Step 1: Compute mean and variance**

\[ \bar d_i = \Sigma_{j=1}^{n_i} \frac{d_{ij}}{n_i} \] \[ \bar d = \Sigma^{n}_{i=1} \frac{d_i}{n} \]

\[
s_i^2 = \Sigma_{j=1}^{n_i} \frac{(d_{ij} - \bar d_i)^2}{n_i-1}
\] **Step 2: Compute pooled estimate of within subject
error**

\[ s_{dw}^2 = \Sigma_{i=1}^{n} [\frac{n_i-1}{N-n} \cdot s_i^2] \]

**Step 3: Compute pooled estimate of between subject
error**

\[ s^2_b = \Sigma_{i=1}^n \frac{ (\bar d_i - \bar d)^2}{n-1} \]

**Step 4: Compute the harmonic mean of the replicate
size**

\[ m_h = \frac{n}{\Sigma_{i=1}^n m_i^{-1}} \]

**Step 5: Compute SD of the difference **

\[
s_d^2 = s^2_b + (1+m_h^{-1}) \cdot s_{dw}^2
\] **Step 6: Calculate l and u**

\[
l = s_d^2 - \sqrt{[s_d^2 \cdot (1 - \frac{n-1}{\chi^2_{(1-\alpha,
n-1)}})]^2+[(1-m_h^{-1}) \cdot (1- \frac{N-n}{\chi^2_{(1-\alpha,
N-n)}})]^2}
\] \[
u = s_d^2 + \sqrt{[s_d^2 \cdot (1 - \frac{n-1}{\chi^2_{(1-\alpha,
n-1)}})]^2+[(1-m_h^{-1}) \cdot (1- \frac{N-n}{\chi^2_{(1-\alpha,
N-n)}})]^2}
\] **Step 7: Compute LME and RME**

\[ LME = \sqrt{\frac{z_{\alpha} \cdot s_d^2}{n} + z_{\beta/2}^2 \cdot (\sqrt{u}-\sqrt{s^2_d} )^2} \]

\[ RME = \sqrt{\frac{z_{\alpha} \cdot s_d^2}{n} + z_{\beta/2}^2 \cdot (\sqrt{l}-\sqrt{s^2_d} )^2} \]

\[ LoA_{lower} = \bar d - z_{\beta/2} \cdot s_d \]

\[ LoA_{upper} = \bar d + z_{\beta/2} \cdot s_d \]

\[ Lower \space CI = LoA_{lower} - LME \]

\[ Upper \space CI = LoA_{lower} + RME \]

\[ Lower \space CI = LoA_{upper} - RME \]

\[ Upper \space CI = LoA_{upper} + LME \]

The assumptions of normality, heteroscedasticity, and proportional
bias can all be checked using the `check`

method.

The function will provide 3 plots: Q-Q normality plot, standardized residuals plot, and residuals plot.

All 3 plots will have a statistical test in the bottom right corner. The Shapiro-Wilk test is included for the normality plot, the Bagan-Preusch test for heterogeneity, and the test for linear slope on the residuals plot.

As the check plots for `a1`

show, proportional bias can
sometimes occur. In these cases Bland and Altman
(1999) recommended adjusting the
bias and LoA for the proportional bias. This is simply done by include a
slope for the average of both measurements (i.e, using an intercept +
slope model rather than intercept only model).

For any of the “agree” functions, this can be accomplished with the
`prop_bias`

argument. When this is set to TRUE, then the
proportional bias adjusted model is utilized. However, you should be
careful with interpreting the hypothesis tests in these cases because
the results are likely bogus for the extreme ends of the measurement. In
any case, plots of the data should always be inspected

```
a1 = agree_test(x = reps$x,
y = reps$y,
prop_bias = TRUE,
agree.level = .8)
#> prop_bias set to TRUE. Hypothesis test may be bogus. Check plots.
print(a1)
#> Limit of Agreement = 80%
#>
#> ###- Shieh Results -###
#> Exact 90% C.I. [-1.2551, 2.1318]
#> Hypothesis Test: No Hypothesis Test
#> Warning: hypothesis test likely bogus with proportional bias.
#> ###- Bland-Altman Limits of Agreement (LoA) -###
#> Estimate Lower CI Upper CI CI Level
#> Bias 0.4383 -0.08968 0.9663 0.95
#> Lower LoA -0.9159 -1.51049 -0.3213 0.90
#> Upper LoA 1.7926 1.19801 2.3872 0.90
#>
#> LoA at average of both measures. Please check plot.
#> ###- Concordance Correlation Coefficient (CCC) -###
#> CCC: 0.4791, 95% C.I. [0.1276, 0.7237]
plot(a1)
```

When the assumptions of any of the tests above are violated then a
non-parametric alternative may be useful. The `agree_np`

function is the non-parametric alternative for the
`SimpleAgree`

R package, and is largely based on the
recommendations of Bland & Altman (Bland and Altman 1999, pg. 157).

The function performs two tests:

- A binomial test on whether or not the observed differences are
within the maximal allowable differences bounds (
`delta`

argument). - Quantile regression, derived from the
`quantreg`

package (Koenker 2020), two estimate the median and 95% limits of agreement. If the default agreement levels are used (`agree.level = .95`

) then the 0.025, 0.5 (median), and 0.975 quantiles are estimated.

The function also *requires* the `delta`

argument
(otherwise the binomial test would be useless). Otherwise, it functions
just like the other agreement functions.

In the code demo below, you will notice that the limits of agreement are no longer symmetric around the bias estimate.

```
a1 = agree_np(x = "x",
y = "y",
data = reps,
delta = 2,
prop_bias = FALSE,
agree.level = .8)
print(a1)
#> Limit of Agreement = 80%
#> Binomial proportions test and quantile regression for LoA
#>
#> agreement lower.ci upper.ci
#> % within 2 0.8333 0.5914 0.9453
#> Hypothesis Test: don't reject h0
#>
#> ###- Quantile Limits of Agreement (LoA) -###
#> Estimate Lower CI Upper CI CI Level
#> Lower LoA -0.89 -1.3899 -0.3901 0.90
#> Bias 0.04 -0.6028 0.6828 0.95
#> Upper LoA 2.45 1.3316 3.5684 0.90
plot(a1)
```

We can also perform the same analysis with proportional bias no longer assumed. You can see that the LoA changes but the test for agreement does not.

```
a1 = agree_np(x = "x",
y = "y",
data = reps,
delta = 2,
prop_bias = TRUE,
agree.level = .8)
print(a1)
#> Limit of Agreement = 80%
#> Binomial proportions test and quantile regression for LoA
#>
#> agreement lower.ci upper.ci
#> % within 2 0.8333 0.5914 0.9453
#> Hypothesis Test: don't reject h0
#>
#> ###- Quantile Limits of Agreement (LoA) -###
#> Estimate Lower CI Upper CI CI Level
#> Lower LoA @ 3.9 -1.28975 -1.7082 -0.87131 0.90
#> Lower LoA @ 5.24 -0.45436 -0.6396 -0.26915 0.90
#> Lower LoA @ 7.4 0.89417 0.6391 1.14921 0.90
#> Bias @ 3.9 -0.73052 -1.5097 0.04868 0.95
#> Bias @ 5.24 -0.07238 -0.6630 0.51820 0.95
#> Bias @ 7.4 0.99000 -0.2801 2.26008 0.95
#> Upper LoA @ 3.9 -0.38310 -2.9616 2.19535 0.90
#> Upper LoA @ 5.24 2.01069 0.9552 3.06622 0.90
#> Upper LoA @ 7.4 5.87483 2.2225 9.52716 0.90
plot(a1)
```

Sometimes there may be a lot of data and individual points of data on
Bland-Altman plot may be less than ideal. In order to change the plots
from showing the individual data points we can modify the
`geom_point`

argument.

In some cases, the agreement calculations involve comparing two methods within individuals within varying conditions. For example, the “recpre_long” data set within this package contains two measurements of rectal temperature in 3 different conditions (where there is a fixed effect of condition). For this particular case we can use bootstrapping to estimate the limits of agreement.

The `loa_lme`

function can then calculate the limits of
agreement. Like the previous functions, the data set must be set with
the `data`

argument. The `diff`

is the column
which contains the difference between the two measurements. The
`condition`

is the column that indicates the different
conditions that the measurements were taken within. The `id`

is the column containing the subject/participant identifier. The final
two arguments `replicates`

and `type`

set the
requirements for the bootstrapping procedure. **Warning**:
This is a computationally heavy procedure and it may take a few seconds
to a few minutes to complete depending the number of replicates or if
`het_var`

is set to TRUE.

There are surprisingly few resources for planning a study that
attempts to quantify agreement between two methods. Therefore, we have
added one function, with hopefully more in the future, to aid in the
power analysis for simple agreement studies. The current function is
`blandPowerCurve`

which constructs a “curve” of power across
sample sizes, agreement levels, and confidence levels. This is based on
the work of Lu et al. (2016).

For this function the user must define the hypothesized limits of
agreement (`delta`

), mean difference between methods
(`mu`

), and the standard deviation of the difference scores
(`SD`

). There is also the option of adjusting the range of
sample size (default: `seq(10,100,1)`

which is 10 to 100 by
1), the agreement level (default is 95%), and confidence level (default
is 95%). The function then produces a data frame of the results. A quick
look at the head and we can see that we have low statistical power when
the sample size is at the lower end of the range.

```
power_res <- blandPowerCurve(
samplesizes = seq(10, 100, 1),
mu = 0.5,
SD = 2.5,
delta = c(6,7),
conf.level = c(.90,.95),
agree.level = c(.8,.9)
)
head(power_res)
#> N mu SD delta power agree.level conf.level
#> 1 10 0.5 2.5 6 0.4870252 0.8 0.9
#> 2 11 0.5 2.5 6 0.5624800 0.8 0.9
#> 3 12 0.5 2.5 6 0.6262736 0.8 0.9
#> 4 13 0.5 2.5 6 0.6802613 0.8 0.9
#> 5 14 0.5 2.5 6 0.7260286 0.8 0.9
#> 6 15 0.5 2.5 6 0.7649104 0.8 0.9
```

We can then find the sample size at which (or closest to which) a
desired power level with the `find_n`

method for
`powerCurve`

objects created with the function above.

```
find_n(power_res, power = .8)
#> # A tibble: 8 × 5
#> delta conf.level agree.level power N
#> <dbl> <dbl> <dbl> <dbl> <dbl>
#> 1 6 0.9 0.8 0.798 16
#> 2 6 0.9 0.9 0.802 50
#> 3 6 0.95 0.8 0.798 20
#> 4 6 0.95 0.9 0.802 63
#> 5 7 0.9 0.8 0.847 10
#> 6 7 0.9 0.9 0.800 19
#> 7 7 0.95 0.8 0.775 11
#> 8 7 0.95 0.9 0.806 24
```

Additionally we can plot the power curve to see how power changes
over different levels of `delta`

, `agree.level`

,
and `conf.level`

Bland, J Martin, and Douglas G Altman. 1986. “Statistical Methods
for Assessing Agreement Between Two Methods of Clinical
Measurement.” *The Lancet* 327 (8476): 307–10. https://doi.org/10.1016/s0140-6736(86)90837-8.

———. 1999. “Measuring Agreement in Method Comparison
Studies.” *Statistical Methods in Medical Research* 8 (2):
135–60. https://doi.org/10.1177/096228029900800204.

Carrasco, Josep L., Tonya S. King, and Vernon M. Chinchilli. 2009.
“The Concordance Correlation Coefficient for Repeated Measures
Estimated by Variance Components.” *Journal of
Biopharmaceutical Statistics* 19 (1): 90–105. https://doi.org/10.1080/10543400802527890.

King, Tonya S, Vernon M Chinchilli, and Josep L Carrasco. 2007. “A
Repeated Measures Concordance Correlation Coefficient.”
*Statistics in Medicine* 26 (16): 3095–3113. https://doi.org/10.1002/sim.2778.

Koenker, Roger. 2020. *Quantreg: Quantile Regression*. https://CRAN.R-project.org/package=quantreg.

Lin, Lawrence I-Kuei. 1989. “A Concordance Correlation Coefficient
to Evaluate Reproducibility.” *Biometrics* 45 (1): 255. https://doi.org/10.2307/2532051.

Lu, Meng-Jie, Wei-Hua Zhong, Yu-Xiu Liu, Hua-Zhang Miao, Yong-Chang Li,
and Mu-Huo Ji. 2016. “Sample Size for Assessing Agreement Between
Two Methods of Measurement by Bland-Altman Method.” *The
International Journal of Biostatistics* 12 (2). https://doi.org/10.1515/ijb-2015-0039.

Shieh, Gwowen. 2019. “Assessing Agreement Between Two Methods of
Quantitative Measurements: Exact Test Procedure and Sample Size
Calculation.” *Statistics in Biopharmaceutical Research*
12 (3): 352–59. https://doi.org/10.1080/19466315.2019.1677495.

Zou, GY. 2011. “Confidence Interval Estimation for the
Blandaltman Limits of Agreement with Multiple Observations
Per Individual.” *Statistical Methods in Medical Research*
22 (6): 630–42. https://doi.org/10.1177/0962280211402548.